The new CCI SunStar merges world-leading non-contact dimensional measurements capability with advanced thin and thick film technology, delivering results you can trust with industry-leading performance...

• Film thickness measurement from 5 um down to 300 nm or less
• 4 million pixel camera for high resolution imaging over a large area
• Auto-range and auto-fringe-find for ease of use
• Single mode of operation over all scan ranges for data you can trust
• Strong, stable and robust closed loop Z scanning mechanism

Film Thickness Measurement: New advances in interferometry are enabling more detailed studies of coatings

The latest interferometers can now use field reflectances from different layers of a coated surface to measure the thickness and the roughness of coatings. Two different approaches can be used, depending upon the coating thickness.

The Talysurf CCI SunStar has been designed to offer both types of film thickness measurement in addition to dimensional and roughness capability. Thick film analysis has been used in recent years to study semi-transparent coatings down to about1.5 microns; the limit is dependent on the refractive index of the materials and the NA of the objective. Thinner coatings have proved more of a challenge,

It is now possible to study thin film coatings down to <300 nm (also refractive index dependent) by interferometry. This new approach allows the study of properties such as film thickness, interface roughness, pinhole defects and delamination of thin coated surfaces, all from a single measurement.

Film Thickness: Thin Film Measurement

Thin film coatings are analysed by the application of the helical complex field (HCF) approach, Patent Taylor Hobson. This is seamlessly integrated into the Talysurf CCI SunStar software and used alongside the standard dimensional and roughness measurement and analysis tools.